BuildPro™ 6.5' (1.98m) x 3' Welding Table: 30" High - Standard Finish

Description

Store
Policies
Arc-Zone
BuildPro™ 6.5' (1.98m) x 3' Welding Table: 30" of Height with Standard Finish
The very practical, modular design of the BuildPro™ Table makes it easy to set-up and tear down for job at hand, big or small.
Save time and money by holding, positioning and locating quickly and easily with a wide variety of BuildPro™ clamps and accessories.
All BuildPro™ Tabletops below have 5/8 thick steel plate, with 5/8Ø holes in a 2" (50.8mm) grid pattern and 1.7" (43.2mm) slots between plates.
The nitriding (heat-treating) process is a mechanical polish and post salt bath oxidative treatment.
The benefits of this process include weld spatter resistance and corrosion and wear resistance.
Specifications:
Surface hardness: HRC 58
Coefficient of friction: 0.37
Nitriding case depth: 0.0004" - 0.0008"
Available Models:
Part#
SHT-TMA57838
Dimensions:
78" (1,980mm) x 38" (965mm) x 36" (914mm)
Height:
680 lbs (308kg)
Capacity:
5,500 lbs (2,494kg) Capacity
Part#
SHT-TMB57838
Dimensions:
78" (1,980mm) x 38" (965mm) x 30" (762mm)
Height:
672 lbs (304kg)
Capacity:
5,500 lbs (2,494kg) Capacity
Part#
SHT-TMQA57838
Dimensions:
78" (1,980mm) x 38" (965mm) x 36" (914mm)
Height:
680 lbs (308kg)
Capacity:
5,500 lbs (2,494kg) Capacity
Part#
SHT-TMQB57838
Dimensions:
78" (1,980mm) x 38" (965mm) x 30" (762mm)
Height:
672 lbs (304kg)
Capacity:
5,500 lbs (2,494kg) Capacity
Part#
SHT-TMA77838
Dimensions:
78" (1,980mm) x 38" (965mm) x 36" (914mm)
Height:
422 lbs (191kg)
Capacity:
4,000 lbs (1,814kg) Capacity
Part#
SHT-TMB77838
Dimensions:
78" (1,980mm) x 38" (965mm) x 30" (762mm)
Height:
414 lbs (187kg)
Capacity:
4,000 lbs (1,814kg) Capacity
ARC-ZONE
®
2091 Las Palmas Drive, Ste. F, Carlsbad, CA 92011-1551
Copyright
©
1997-2017, Arc-Zone
®
, Inc. All Rights Reserved.