6 Gauge set w/senders,Speedo,Tacho,Oil,Temp,Fuel,Volt, BWB

Description

New 6 Gauge 316L SS Bezel
S
et
****IF USING AN AFTERMARKET UNIT, YOU MAY NEED A TACH ADAPTER****
****
PLEASE CHECK THE SIZES OF EACH GAUGE BEFORE PURCHASING****
****PLEASE ALSO SEE NOTE AT BOTTOM****
These gauges may require professional installation. The tachometer needs to be programmed.
Set includes 6 gauges: Speedometer, Tachometer, oil pressure, water temp, fuel & volt meter.
Sensors/Senders for Oil Psi, Water Temp, Fuel And
Speedometer Sender
Included.
Speedometer and Tachometer Specs:
Tachometer
Auto 4, 6, 8, 10 and 12 cylinder
Marine Gas 2 and 4 cycle
Marine/Auto Diesel input from your Hall effect transducer or alternator W output
Black face,
316L Stainless Steel
bezel.
3-3/8” or 86mm mounting Footprint.  Bracket Mounting.
AMP 8-pin connector wiring.
Speedometer - Easy setup with GPS Antenna
Accepts all input signals.
Blue LED back lighting.
Lighted Red Pointer.
Step motor design.
Accessory Gauges
316L Stainless Steel
bezel with black face.
All gauges except volt meter will work on 12 and 24 volt systems
90 degree sweep.
2-1/16” or 52mm mounting holes, screw on.
Bracket stud type connection.
Blue LED back lighting.
RED pointer.
Input ranges:
Oil pressure: 240-33 ohms, show 0-100 PSI
Fuel level:
10-180
ohms, E - F (VDO style)
Temp:
240-33
-33 ohms, 100-250 F
Volt:
1
0-16 V
S
ender:
Oil pressure sender: 0-100psi.
Temp sender: 100 - 240F
Fuel level sender, 10-180 ohms.
GPS External Antenna
****IF USING AN AFTERMARKET UNIT, YOU MAY NEED A TACH ADAPTER****
***Once these gauges are installed, they may not be returnable. If the wires are cut, gauges are scraped, or have any signs of use, they become non-sellable and therefore, we can not issue a refund. We ask that you double check the sizes of all of the gauges before purchasing to avoid this scenario.***