4x32 Crossbow Scope, Red Green Illuminated Retical Crossbow Scopes with Mounts

Description

MA3TY 4x32 Crossbow scope: made from 1-piece tube aircraft-quality aluminum for durability and shock resistance. The black matte finish is scratch resistant, nonreflective and durable.
MA3TY scope features 4x magnification with the multi-layer coated lenses, light-transmission up to 93%, that provides maximum brightness, clarity and contrast.
Impact resistance up to 600G, full waterproof to 19.7" and fog-proof.
Ballistic Reticle with Red/Green illumination, 5 levers brightness and max clarity for every shot.
Windage and elevation adjustments with your fingertip under the screw-down caps.
MA3TY 4X32 CROSSBOW SCOPE
If you want a solid optic on your crossbow at a good amount, MA3TY 4×32 Crossbow Scope is a good choice.
The 4x magnification is perfect for a crossbow, and the 32mm objective lens creates a bright and clear picture. The fixed nature of the optic’s power makes it simple for hunting.
This crossbow optic rocks an illuminated reticle in both green and red, making it easy to use in all light conditions. Not to mention the reticle is glass etched. That means even if the battery dies you still have a usable black reticle!
4×32 Crossbow Scope
Material: durable aircraft grade aluminum
MAGNIFICATION: 4x OBJECTIVE DIAMETER: 1.26''(32mm)
TUBE DIAMETER: 1''
Nitrogen: Full filled Nitrogen Shockproof: 600G Waterproof: 19.7"
Large Ocular
Multi-layer coated lenses, light-transmission up to 93%, that provides maximum brightness, clarity and contrast.
Red/ green Illumination
Ballistic Reticle with Red/Green illumination, 5 levers brightness and max clarity for every shot.
Windage and Elevation Adjustment
Premium Zero Lockable and Resettable Target Turrets for Windage and Elevation Adjustment, you can really dial it to your personal accuracy.
Easy zeroing the scope
First, place a paper target on the backstop at about 10 yards and take a shot at its center. Remove the dust covers from the windage and elevation turrets of the scope and make adjustments as necessary to the turret to bring the point of impact (POI) closer to the point of aim (POA).
A high impact point requires a clockwise adjustment. Both turrets move the POA a 1/2 minute of angle per click – this is equal to a 1/2 inch at 100 yards or a 1/20th of an inch at 10 yards.
Once achieving an approximate zero at 10 yards, move back to a measured 20 yards and continue adjusting the turrets until the top cross of the reticle and the point of impact are the same. At this range each click equals 1/10th of an inch.
Shoot a three-shot group at your target and adjust until your reticle and groups are aligned when you are happy with the 20 yard zero, replace the turret cover